|
Post by sjones26573 on Nov 23, 2013 0:22:46 GMT -5
I'm sure everyone wants to show off their work, so post up some pics of your rig and some specs.
|
|
|
Post by sjones26573 on Nov 23, 2013 0:34:23 GMT -5
Mine is an '04 TJ X. It is running 4" of suspension lift with a load of different brands in it, as well as a 1 1/4" body lift and 1" MML. I am running 33" MTZ's on 17" Fuel Hostages. I am running a JB Conversions SSSYE and custom Carolina Drivelines shaft. Out back I have a Ford 8.8 with an Artec truss kit and 4.10 ratio. Up front I have a temporary swapped D30 with a Detroit TrueTrac in it. I am also using a custom transmission crossmember so I can run a flat skid, which I just need to finish building and install. Rampage rear bumper, Metalcloak front, and a load of electrical stuff which is currently being redone and added to. I am building a Wagoneer Dana 44 for the front which will be trussed, will run a Lockright, locking hubs, converted to 5x5.5 and geared 4.88 with chromo shafts. I have a Super 88 kit for the 8.8 which will give it chromo shafts as well as the 5x5.5 pattern. When I'm done it will be 3/4 linked running 37" MTZ's wrapped around Hutchinson RockMonster CJ beadlocks. I'll be running all Metalcloak armor with 4" stretch in the rear and 2" in the front.
|
|